Filter
Top Products
26
Xxxxx Xxxxxxxx
Xxxxx Xxxxxxxx
Xxxxx Xxxxxxxx
26
FP OPC Server
FP OPC Server license
FP Data Analyzer
PCWAY
CommX
Product name Description Product number
Standardized connectivity to FP Series PLCs (software with one license)
Additional license for FP OPC Server
Software tool to read and display PLC data
Data monitoring, logging and setting software based on Excel
OCX for communication, Internal data can be displayed and
operated on Visual Basic
AFPS03510D
AFPS03517D
AFPS04510D
AFW10031
AFW20031
Other software tools
Number of
channels
10Mbps, 8192 points/8192 words, 99 units max. (VE mode), 254 units max. (FL-net), 2500m
For FP2SH only (Cannot be used for FP2)
Ethernet-compatible unit for FP2/FP2SH
To be mounted on the CPU backplane
ET-LAN unit setting software (English)
For PLC links
Compatible with MEWNET-W/MEWNET-W2
Up to two blocks to be attached can be selected among RS485, RS232C, and RS422 blocks.
General-purpose serial communications, computer links, PLC links (MEWTNET-W0)
(For the multi-communication unit) 230kbps, 15m max.
(For the multi-communication unit) 230kbps, 1200m max.
(For the multi-communication unit) For PLC links (MEWNET-W0): 115kbps, 16 stations, 1,200m
For 1:1 communication between a PLC and a computer
RS232C x 2 ch Connection with a control panel is also possible
For communications with general-purpose RS232C devices
The serial input/output is executed by sequence commands
1ch
1ch
1ch
2ch
1ch
1ch
1ch
2ch
2ch
FP2-VE
FP2-ET1
AFPS32510
FP2-MW
FP2-MCU
FP2-CB232
FP2-CB422
FP2-CB485
FP2-CCU
FP2-SDU
Product number
Specification
Product name
FP2 MEWNET VE-link unit
FP2 ET-LAN unit
Control Configurator ET
FP2 Multi-wire link unit
FP2 Multi-communication unit
RS232C block
RS422 block
RS485 block
FP2 Computer
communication unit
FP2 Serial data unit
FP2 FNS unit 1ch FP2-FNSFlexible Network Slave unit for FP2/FP2SH
PROFIBUS Plug-In Module 1ch AFPN-AB6200Plug-In network block for PROFIBUS
DeviceNet Plug-In Module 1ch AFPN-AB6201Plug-In network block for DeviceNet
CANopen Plug-In Module 1ch AFPN-AB6218Plug-In network block for CANopen
Serial communication and link-related intelligent units
Number of
channels
10Mbps, 8192 points/8192 words, 99 units max. (VE mode), 254 units max. (FL-net), 2500m
For FP2SH only (Cannot be used for FP2)
Ethernet-compatible unit for FP2/FP2SH
To be mounted on the CPU backplane
ET-LAN unit setting software (English)
For PLC links
Compatible with MEWNET-W/MEWNET-W2
Up to two blocks to be attached can be selected among RS485, RS232C, and RS422 blocks.
General-purpose serial communications, computer links, PLC links (MEWTNET-W0)
(For the multi-communication unit) 230kbps, 15m max.
(For the multi-communication unit) 230kbps, 1200m max.
(For the multi-communication unit) For PLC links (MEWNET-W0): 115kbps, 16 stations, 1,200m
For 1:1 communication between a PLC and a computer
RS232C x 2 ch Connection with a control panel is also possible
For communications with general-purpose RS232C devices
The serial input/output is executed by sequence commands
1ch
1ch
1ch
2ch
1ch
1ch
1ch
2ch
2ch
FP2-VE
FP2-ET1
AFPS32510
FP2-MW
FP2-MCU
FP2-CB232
FP2-CB422
FP2-CB485
FP2-CCU
FP2-SDU
Product number
Specification
Product name
FP2 MEWNET VE-link unit
FP2 ET-LAN unit
Control Configurator ET
FP2 Multi-wire link unit
FP2 Multi-communication unit
RS232C block
RS422 block
RS485 block
FP2 Computer
communication unit
FP2 Serial data unit
FP2 FNS unit 1ch FP2-FNSFlexible Network Slave unit for FP2/FP2SH
PROFIBUS Plug-In Module 1ch AFPN-AB6200Plug-In network block for PROFIBUS
DeviceNet Plug-In Module 1ch AFPN-AB6201Plug-In network block for DeviceNet
CANopen Plug-In Module 1ch AFPN-AB6218Plug-In network block for CANopen
FP2-MW
FP2-C1SL
FP2-SL2
Number of I/O points
Not insulated Voltage: 1 to 5V, -10 to +10V Current: 4 to 20mA, -20 to +20mA
Insulated Voltages, currents, thermocouples, resistance thermometer devices
R.T.D. type: Pt 100, JPt 100, JPt 1000 type
Voltage range: -10 to +10V Current range: 0 to 20mA Resolution: 1/4096
Transistor
Line drive
2, independent
4, independent
2, independent
4, independent
2
4
8
Tool software for positioning unit RTEX (English)
FP2-PN2AN
FP2-PN4AN
FP2-PN8AN
AFPS66510
1pps to 500kpps
1pps to 4Mpps
FP2-PP21
FP2-PP41
FP2-PP22
FP2-PP42
FP2-HSCT
FP2-HSCP
FP2-PXYT
FP2-PXYP
NPN output
PNP output
NPN output
PNP output
FP2-DA4
Number of
channels
10Mbps, 8192 points/8192 words, 99 units max. (VE mode), 254 units max. (FL-net), 2500m
For FP2SH only (Cannot be used for FP2)
Ethernet-compatible unit for FP2/FP2SH.
To be mounted on the CPU backplane
ET-LAN unit setting software (English)
For PLC links
Compatible with MEWNET-W/MEWNET-W2
Up to two blocks to be attached can be selected among RS485, RS232C, and RS422 blocks.
General-purpose serial communications, computer links, PLC links (MEWTNET-W0)
(For the multi-communication unit) 230kbps, 15m max.
(For the multi-communication unit) 230kbps, 1200m max.
(For the multi-communication unit) For PLC links (MEWNET-W0): 115kbps, 16 stations, 1,200m
For 1:1 communication between a PLC and a computer
RS232C x 2 ch Connection with a control panel is also possible
For communications with general-purpose RS232C devices
The serial input/output is executed by sequence commands
1ch
1ch
1ch
2ch
1ch
1ch
1ch
2ch
2ch
FP2-VE
FP2-ET1
AFPS32510
FP2-MW
FP2-MCU
FP2-CB232
FP2-CB422
FP2-CB485
FP2-CCU
FP2-SDU
FP2-AD8VI
FP2-AD8X
FP2-RTD
FP2-AD8VI
FP2-AD8X
FP2-RTD
Product numberControllable I/O points
Product number
Product number
Product number
Specification
Specification
Specification
Specification
Product name
Product name
Product name
Product name
FP2 Multi-wire link unit
FP2 CPU unit with S-LINK
FP2 S-LINK unit
Can connect as the remote I/O system MEWNET-F master station
Perfect for remote I/O systems using many points
Direct connection to SUNX Co., Ltd., S-LINK reduced-wiring system
CPU unit with 128 points x 2 channels
Direct connection to SUNX Co., Ltd., S-LINK reduced-wiring system
CPU unit with 128 points x 2 channels
Max. 2048 points per one unit
256 points at S-LINK section
128 points per one unit
FP2 Positioning unit RTEX
Control Configurator PM
FP2 Positioning unit
Multiifunction type
FP2 High-speed counter unit
FP2 Pulse I/O unit
FP2 MEWNET VE-link unit
FP2 ET-LAN unit
Control Configurator ET
FP2 Multi-wire link unit
FP2 Multi-communication unit
RS232C block
RS422 block
RS485 block
FP2 Computer
communication unit
FP2 Serial data unit
Output type Number of axes controlled Speed command
8 interrupt inputs 4-channel high-speed counter 8 comparison outputs
Input: 24VDC Output: 5 to 24VDC (0.1A, 12 points/0.8A, 4 points)
8 interrupt inputs 4-channel high-speed counter 8 comparison outputs
4 pulse output channels 4 PWM output channels
Input: 24VDC Output: 5 to 24VDC (0.1A, 12 points/0.8A, 4 points)
FP2 Analog
input unit
FP2 Analog output unit
Analog input: 8 channels
Analog input: 8 channels
R.T.D. input: 8 channels
Analog input: 4 channels
Notes: 1) Pressure welding socket is supplied. A special tool (part no. AXY52000) is needed for connection. Please purchase separately if you are using a terminal or flat
cable socket.
2) Please refer to “FP3 (Sigma) Product Types” for Motor driver I/F terminal II.
3) Previous FP2 positioning units FP2-PP2 and FP2-PP4 are not compatible with the multi-function type FP2 positioning unit.
3)
AAAA
N/AAAA
N/AAAA
N/AAAA
AAAA
AAA A
A
A
A
A
A
A
A
A
A
N/A
A
N/A
FPWIN Pro
for Windows
FPWIN Pro
for Windows
Full version with English manual
Full version with German manual
Full version with French manual
Small version with English manual
Small version with German manual
Small version with French manual
English: Full type
English: Small type
FPWINPROFEN5
FPWINPROFDE5
FPWINPROFFR5
FPWINPROSEN5
FPWINPROSDE5
FPWINPROSFR5
CD-ROM for Windows
CD-ROM for Windows
A: Available, N/A: Not available
A: Available, N/A: Not available
*1 FP1, FP-M, and FP3/FP10SH have been discontinued.
FPWIN Pro PLC programming software according to IEC 61131-3
FP2/FP2SH
Product Types
08/2007