Panasonic TH-50AS670M Work Light User Manual


 
- 47 -
3D
Note
Display the image (TV, external input, etc.) full-screen for viewing 3D.
Do not exert pressure on or scratch the lens of the 3D Eyewear.
3D content will not be correctly visible if the 3D Eyewear is worn upside
down or back-to-front.
When viewing 3D images, make sure your eyes are at an approximately
horizontal level and keep a position where you do not see double images.
Do not wear the 3D Eyewear when watching something other than 3D
images. Liquid crystal displays (such as computer screens, digital clocks
or calculators, etc.) may be difficult to see while wearing the 3D Eyewear.
Do not use the 3D Eyewear as sunglasses.
3D effects may be perceived differently depending on the person.
3D Eyewear - Maintenance
Storing and cleaning the 3D Eyewear
Store the 3D Eyewear in a cool, dry place.
Clean using a soft, dry cloth.
Wiping the 3D Eyewear with a cloth that is covered in dust or dirt may
scratch the eyewear. Shake off any dust from the cloth before use.
The lens of the 3D Eyewear is easily broken. Be careful when cleaning
the lens.
Do not use benzene, thinner or wax on the 3D Eyewear, otherwise this
may cause peeling of the paint.
Do not dunk the 3D Eyewear in liquid such as water.
Viewing 3D
You can enjoy viewing 3D images with contents or programmes
corresponding to the 3D effect by wearing the 3D Eyewear.
This TV supports Frame Sequential, Side by Side and Top and Bottom 3D
formats.
Frame Sequential is the 3D format that the images for the left and right
eyes are recorded with the high definition quality and alternately played
back.
1. Put the 3D Eyewear on.
2. View the 3D images.