Filter
Top Products
Ethernet 10Base-T and 100Base-T 65
SmartNode 4520 & 4110 Series User Manual C • Cabling
Ethernet devices (10Base-T/100Base-T) are connected to the SmartNode over a cable with RJ-45 plugs. Use a
cross-over cable to a host, or a straight cable to a hub. See figure 30 (host) and figure 31 on page 66 (hub) for
the different connections.
Note The SmartNode 4520 Series is equipped with Auto-MDX Ethernet ports.
Use straight-through wired cables for host or hub/switch connections
Figure 30. Ethernet cross-over