Filter
Top Products
10 C4603M-A (5/09)
POOL SETTINGS
1. Type the failover static IP address, or the domain name that was configured on the Pool Manager, in the Manager Address box.
2. Type the key that is generated on the manager unit in the Manager Key box, and then click Validate Key to verify that the key was entered
correctly. If correct, the Pool Name entered on the Manager unit is displayed.
NOTES:
• The Pool Name is assigned through the Pool Manager.
• To remove a member from the pool, click the Remove From Pool button.
3. Click save to retain the settings.
CHANGING SECURITY SETTINGS
1. Click the Account Settings button (refer to Figure 7).
2. Type a new password for the Web application in the “Enter new password” and “Re-enter new password” boxes. The new password
replaces the default password used by the Web application.
3. Type a security question and answer in the respective boxes. This information can be used to access the Web application if you forget the
password.
4. Click Save to retain your settings.
Figure 7. Account Settings Screen