Filter
Top Products
10
To start the machine, depress the switch trigger (A) Fig. 13. To stop the machine, release the switch trigger.
This saw is equipped with an automatic electric blade brake. As soon as the switch trigger (A) Fig. 13 is released, the electric
brake is activated and stops the blade in seconds.
A rotating saw blade can be dangerous. After completing the cut, release the switch trigger (A) Fig. 13
to activate the blade brake. Keep the cuttinghead down until the blade has come to a complete stop.
The torque developed during braking may loosen the arbor screw. The arbor screw should be checked
periodically and tightened if necessary
.
LOCKING SWITCH IN THE “OFF” POSITION
IMPORTANT: When the miter saw is not in use, the switch should be locked in the "OFF" position, using a padlock (B) Fig.
14 with a 3/16" diameter shackle to prevent unauthorized use of the saw.
STARTING AND STOPPING MACHINE
A
B
Fig. 13
Fig. 14
OPERATION
Before operating your miter saw, firmly mount it to a workbench
or other supporting surface. Four holes (A) Fig. 12 are provided for
fastening the saw to a supporting surface.
When frequently moving the saw from place to place, mount the
saw on a 3/4” piece of plywood. The saw can then be easily
moved from place to place and the plywood can be clamped to
the supporting surface using “C” clamps.
FASTENING MACHINE TO SUPPORTING SURFACE
A
Fig. 12
In the event of a power outage, always lock switch in “OFF” position until the main power is restored.
OPERATING CONTROLS AND ADJUSTMENTS
A
Depress the spring clips (A) Fig. 11 of the dust bag (B)
and clip the dust bag (B) over the ribs of the dust chute.
ATTACHING THE DUST BAG
B
A
Fig. 11