Filter
Top Products
10
Line Generating Feature
You have just purchased your Self-Leveling, Remote Controlled Laser,
Rotary Level with the new line-generating feature. The following outlines the
operation of the feature with your Rotary Level.
The line-generating feature converts Rotary Level’s single laser dot into a line
of bright dots, designed specifically for interior leveling applications. Turn
the line generation feature switch
“ON”. A horizontal, stationary line of
bright laser dots will appear if the
Rotary Level is level and a horizontal,
flashing line of bright laser dots will
appear if the Rotary Level is not level.
Reposition the Rotary Level within its
self-leveling range of +/- 10 degrees
to achieve a stationary, horizontal
level line of laser dots. The line can
then be positioned around the
worksite with the Rotary Level remote
control.
Note: The center section of the line
yields the brightest dots. Dots at the
far extreme will appear fainter.
Note: Be sure to turn the Rotary Level off during storage and transportation.
Failure to do so will affect the battery life.
User Safety
Important: These labels are attached to every Rotary Level.
They are not to be removed or defaced.
FCC Statement
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communication. However,
there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures: