Porter-Cable LR1100 Laser Level User Manual


 
2
GENERAL SAFETY RULES
ELECTRICAL SAFETY
1. Use battery operated rotary level with alkaline batteries only. Use of
any other batteries may permanently damage the rotary level.
PERSONAL SAFETY
1. Stay alert, watch what you are doing, and use common sense when
operating a laser. Do not use rotary level while tired or under the
influence of drugs, alcohol, or medication. A moment of inattention while
operating a laser may result in personal injury.
2. Use safety equipment. Eye protection, dust mask, non-skid safety
shoes, hard hat, or hearing protection must be used for appropriate
conditions.
3. Prolonged eye contact with laser beams can cause eye irritation and
injury to the eye. Never stare direcly into beam or view with optical
instruments. Avoid prolonged eye contact with laser beams. Laser beam
contact with the eyes can also cause temporary flash blindness, which can
cause the user to be distracted, which can lead to accidents.
4. Do not aim the laser beams at others.
TOOL USE AND CARE
1. Do not use rotary level if switch does not turn it on or off. A laser that
cannot be controlled with the switch is dangerous and must be repaired.
2. Store idle rotary level out of reach of children and other untrained
persons. Rotary level should only be used by trained users.
3. Use only accessories that are recommended by the manufacturer for
your model. Accessories that may be suitable for one rotary level may create
a risk of injury when used on another rotary level.
SERVICE
1. Rotary Level service must be performed only by qualified repair
personnel. Service or maintenance performed by unqualified personnel may
result in a risk of injury.
2. When servicing a rotary level, use only identical replacement parts.
Follow instructions in the Maintenance Section of this manual. Use of
unauthorized parts or failure to follow Maintenance Instructions may create a
risk of shock or injury.
SPECIFIC SAFETY RULES
1. Be aware that the rotary level is always in an operating condition,
because it does not have to be plugged into an electrical outlet. Always set
the switch to the “OFF” position when installing or removing the batteries.
2. IMPORTANT: These labels are attached to every rotary level. They
are not to be removed or defaced.
3.
CAUTION: Use of controls, adjustments or procedures other than those
specified herein may result in laser radiation exposure.
4. AVOID EXPOSURE: Laser radiation is emitted from this aperture.
5. WARNING: There are certain applications for which this rotary
level was designed. Porter-Cable strongly recommends that this rotary level
NOT be modified and/or used for any application other than for which it was
designed. If you have any questions relative to its application DO NOT use
the rotary level until you have written Porter-Cable and we have advised you.
Technical Service Manager
Porter-Cable Corporation
4825 Highway 45 North
Jackson, TN 38305