Filter
Top Products
8
Unpacking
Open shipping container and check for shipping
damage. Report any damage immediately to
your distributor and shipping agent. Do not
discard any shipping material until the Sander is
assembled and running properly.
Compare the contents of your container with the
following parts list to make sure all parts are
intact. Missing parts, if any, should be reported
to your distributor. Read the instruction manual
thoroughly for assembly, maintenance and
safety instructions.
Contents of the Shipping Container
Container #1 (Sander):
1 Belt/Disc Sander
1 Abrasive Belt, 6” x 48”, 60 grit
1 Abrasive Disc, 12” dia., 60 grit
1 Disc Table Assembly
1 Fence Assembly
1 Miter Gauge Assembly
1 Bag of Fasteners, contains:
2 Socket Head Cap Screws, M10x25 – AA
4 Hex Head Screws, M8 x 25 – BB
4 Lock Washers, M8 – CC
4 Flat Washers, M8 – DD
2 Flat Washers, M10 – EE
1 Owner's Manual (not shown)
1 Warranty Card (not shown)
Container #2 (Stand):
1 Stand with motor
1 Dust Outlet
1 Bag of Fasteners, contains:
4 Pan Hd. Flanged Screws, M6 x 12 – FF
2 Pan Head Screws, M5 x 12 – GG
2 Pan Head Screws, M4 x 8 – HH
2 Lock Washers, M4 – JJ
2 Flat Washers, M4 – KK
Figure 2