Filter
Top Products
17
3. Mount front rail (A, Fig. 14) to the band saw
table using two M6 x 20 hex cap screws, two
1/4" lock washers and two 1/4" flat washers
(B, Fig. 14). Do not tighten yet.
4. Mount guide rail (A, Fig. 15) to the front rail
using three M6 x 20 hex cap screws, three
1/4" lock washers and three 1/4" flat washers.
Tighten the screws to secure the guide rail to
the front fence.
5. Attach the fence to the fence body using four
hex cap screws, four lock washers and four
flat washers (A, Fig. 16). Tighten the screws.
Lift up on the fence handle and set the fence
assembly onto the table and guide rail.