RIDGID AC9944 Saw User Manual


 
12
�To remove saw from workstand:
Push locking lever release buttons and raise the locking
levers to unlock the saw mounting brackets assembly.
��Grasp the handles on either side of the assembly and lift
away from the rear edge of the table to disengage.
�With the assembly tilted slightly toward you, lift the front
part of the assembly to disengage from the front edge of
the table.
CAUTION:
Do not mount miter saw to workstand before
ensuring workstand can be opened and locked
securely. Failure to do so may result in possible
injury and damage to the tool.
OPENING THE WORKSTAND
See Figures 15 - 16.
SETUP:
NOTE: If saw is mounted, ensure that saw is in folding
transportation position. See figure 17.
From the upright position, pull the lock knob and lift legs
up until the spring pin locks into place.
WARNING:
To reduce the risk of injury, make sure leg set is
secured in the notch by the lock knob. Failure to
latch may cause workstand to fall in use.
Slowly lower workstand until the legs rest on the
ground.
Stand at wheel end of workstand and grasp the lift assist
handle. Push down on lock mechanism release lever and
lift workstand into raised position.
NOTE: The workstand is heavy. Get help when needed.
WARNING:
To avoid serious personal injury when lifting, bend
your knees so you can lift with your legs, not your
back.
CAUTION:
Do not lift by any part of the miter saw that is
attached to the workstand. Failure to heed this
warning may result in possible injury and damage
the tool.
Step on leg support while lifting table up by lift assist
handle. The wheels should move further under workstand
until unit is locked into place.
Ensure workstand is locked into position before use.
ASSEMBLY
15
20
25
30
35
40
45
10
PUSH IN AND
LIFT TO UNLOCK
LOCKING LEVER
LIFT TO
RELEASE LEVER
Fig. 14
LOCKING LEVER
RELEASE BUTTON
DOBLEZ ABAJ
O
FOLD DOWN
SETUP
INSTALE
INSTALLAT
ION
PLI VERS L
E BAS
ENSU
RE TOO
L IS AT “W
HEEL E
ND” O
F STAND B
EFORE FOL
DING
/ TRANSPO
RTING
ASSU
REZ-VOUS
QU
E
L’OUTIL
SE T
ROUV
E À LA MÊME E
XTRÉM
I
TÉ D
U SUPP
O
RT QUE LES ROUE
S AVAN
T
DE P
L
IER/TRANSPORTER
ASEGÚRES
E D
E
Q
UE LA
H
ERR
AMIEN
T
A ESTÉ
EN
EL EXTRE
MO DE
L BA
N
CO CORRE
SPONDIENTE A LAS
RU
EDAS A
N
TES
DE DESP
LE
G
AR
/
T
R
ANSPORTAR
ADVERTENCIA
AVERTISSEME
NT
Miter
Fig. 15
LOCK MECHANISM RELEASE LEVER