Filter
Top Products
15
15
20
25
30
35
40
45
10
USING THE WORK SUPPORT
See Figure 20.
Rest the workpiece on top of the work support to support
the workpiece during cutting operations.
NOTE: More than one work support can be used on an
extension arm at a time when extra support is necessary.
Always lower extension arm support legs when using work
supports.
Rest the workpiece on the work support work stop whenever
you need to make repetitive cuts of the same size.
NOTE: To avoid a greater risk of binding or pinching, do
not use both work support at the same time when using the
work stop feature.
OPERATION
Fig. 20
HEIGHT
ADJUSTMENT KNOB
DISTANCE
ADJUSTMENT KNOB
WORK SUPPORT
ADJUST WORK
SUPPORT UP AND DOWN
ADJUST
WORK SUPPORT
IN AND OUT
EXTENSION ARM
To adjust the work support:
Loosen the work support height adjustment knob.
Adjust the work support to the desired position.
Tighten the work support height adjustment knob.
Lower extension arm support leg.
To adjust work support distance:
Loosen the work support distance adjustment knob.
Slide the work support to the desired position along the
extension arm.
Tighten the work support distance adjustment knob.
Lower extension arm support leg.
WORK STOP
SUPPORT LEG