Filter
Top Products
16
MAINTENANCE
WARNING:
When servicing use only identical RIDGID
replacement parts. Use of any other parts may
create a hazard or cause product damage.
WARNING:
Always wear safety goggles or safety glasses with
side shields during power tool operation or when
blowing dust. If operation is dusty, also wear a
dust mask.
GENERAL MAINTENANCE
Avoid using solvents when cleaning plastic parts. Most
plastics are susceptible to damage from various types of
commercial solvents and may be damaged by their use. Use
clean cloths to remove dirt, dust, oil, grease, etc.
WARNING:
Do not at any time let brake fluids, gasoline,
petroleum-based products, penetrating oils, etc.,
come in contact with plastic parts. Chemicals can
damage, weaken or destroy plastic which may
result in serious personal injury.
Periodically check all fasteners for tightness. Retighten as
necessary.
CLEANING AND LUBRICATING
See Figures 21 - 22.
Clean and lubricate the lock mechanism hinge.
Lubricate the spring cylinder shaft.
Fig. 22
LOCK MECHANISM HINGE
SPRING CYLINDER SHAFT
Fig. 21