Filter
Top Products
10
0
2
4
6
40
80
120
160
bar
0
2
4
6
40
80
120
160
bar
ON
OFF
O
I
1
TM
2
MINI WHEELBARROW COMPRESSOR
OIL LUBE PUMP
-
POMPE A HULE - BOMBA CON LUBRICACION DE ACI
ETE
5 Gallon
18,8 Litre
18,7 Litro
4.4 SCFM @ 90PSI
0,12 m /Min @ 621 kPa
0,12 m /Min @ 6,21 bar
145 Max PSI
999 KpA
9,99 bar
3
3
T
A
N
Q
U
E
-
T
A
N
K
-
R
E
S
E
V
I
O
R
E
N
C
H
U
F
E
-
T
A
N
K
-
S
O
R
T
I
E
UNPACKING
This product requires assembly.
Carefully remove the product and any accessories from
the box. Make sure that all items listed in the packing list
are included.
Inspect the product carefully to make sure no breakage
or damage occurred during shipping.
Do not discard the packing material until you have care-
fully inspected and satisfactorily operated the product.
If any parts are damaged or missing, please call
1-800-4-RIDGID for assistance.
PACKING LIST
Air Compressor
Handles (2)
Phillips Head Screw (4)
Wheel
Axle Rod
Hitch Pins (2)
Washers (2)
Oil Dipstick
Lubricant
Operator’s Manual
WARNING:
If any parts are damaged or missing do not operate
this product until the parts are replaced. Failure to
heed this warning could result in serious personal
injury.
WARNING:
Do not attempt to modify this product or create
accessories not recommended for use with this
product. Any such alteration or modification is
misuse and could result in a hazardous condition
leading to possible serious personal injury.
ASSEMBLY
WARNING:
Do not connect to power supply until assembly
is complete. Failure to comply could result in
accidental starting and possible serious personal
injury.
SCREW
HANDLE
HANDLE
RELEASE KNOB
Fig. 3
HOLES
INSTALLING THE HANDLES
See Figure 3.
Insert supplied handle through handle slot by lifting up
on handle release knob and sliding handle through slot.
Push handle all the way up to the bent portion of the
handle and release handle release knob.
Install supplied Phillips head screw into slot in handle.
Repeat handle installation on the opposite side.