Filter
Top Products
SAFETY
CRYSTALVIEW PRO FIBER
INSTALLATION AND OPERATIONS MANUAL
23
Safety
The CrystalView Pro Fiber KVM extender has been tested for
conformance to safety regulations and requirements, and has been
certified for international use. Like all electronic equipment, the
CrystalView Pro Fiber should be used with care. To protect yourself from
possible injury and to minimize the risk of damage to the Unit, read and
follow these safety instructions.
Follow all instructions and warnings marked on this Unit.
Except where explained in this manual, do not attempt to service this
Unit yourself.
This product is a Class 1 laser product. Do not look into a fibers end
directly while it is connected to a unit. Eye hazard may occur.
Do not use this Unit near water.
Assure that the placement of this Unit is on a stable surface or rack
mounted.
Provide proper ventilation and air circulation.
Keep power cord and connection cables clear of obstructions that
might cause damage to them.
Use only power cords, power adapter and connection cables
designed for this Unit.
Use only a grounded (three-wire) electrical outlet.
Use only the power adapter provided with the CrystalView Fiber.
Keep objects that might damage this Unit and liquids that may spill,
clear from this Unit. Liquids and foreign objects might come in contact
with voltage points that could create a risk of fire or electrical shock.
Operate this Unit only when the cover is in place.
Do not use liquid or aerosol cleaners to clean this Unit. Always
unplug this Unit from its electrical outlet before cleaning.
Unplug this Unit from the electrical outlet and refer servicing to a
qualified service center if any of the following conditions occur:
The power cord or connection cables is damaged or frayed.
The Unit has been exposed to any liquids.
The Unit does not operate normally when all operating
instructions have been followed.
The Unit has been dropped or the case has been damaged.
The Unit exhibits a distinct change in performance, indicating a
need for service.