Filter
Top Products
Page 12
ADJUSTMENTS
Fig. 9
QUICK LOCK-RELEASE LEVER
See Figures 9 and 10.
The quick lock-release lever engages the vise clamp to be
used along with the fence assembly to provide a vise for
securing the workpiece to be cut. It also allows you to open
and close the vise quickly without repetitive turning of the
vise crank handle.
USING THE QUICK LOCK-RELEASE LEVER
AND VISE CLAMP
TO LOOSEN
See Figure 9.
■ Unplug your cut-off machine.
WARNING:
Failure to unplug cut-off machine could result in accidental
starting causing possible serious personal injury.
■ Release tension on the vise clamp by rotating the vise
crank handle 1/2 to 1 turn counterclockwise.
■ Lift up the quick lock-release lever as shown in figure 9
and pull back on vise crank handle to slide open the vise.
TO TIGHTEN
See Figure 10.
■ Unplug your cut-off machine.
WARNING:
Failure to unplug cut-off machine could result in accidental
starting causing possible serious personal injury.
■ Push the vise crank handle forward to slide the vise clamp
against the workpiece.
■ Rotate the quick lock-release lever forward and push
down as shown in figure 10 to engage its threads with
the vise screw.
■ Rotate the vise crank handle clockwise to tighten the vise
clamp against the workpiece.
Fig. 10
QUICK LOCK-RELEASE LEVER
WITH THREADS NOT ENGAGED
VISE
CLAMP
VISE CRANK
HANDLE
VISE
SCREW
VISE
CLAMP
VISE CRANK
HANDLE
QUICK LOCK-RELEASE LEVER
WITH THREADS ENGAGED