Filter
Top Products
Page 9
FEATURES
Know Your Table Saw
Your saw is designed to perform as a versatile, accurate,
precision wood cutting tool that is easy to operate. It is
equipped with the following features for convenience, ease
of use, and high quality performance:
■ Combination saw blade.
■ Bevel indicator to set the exact angle of the blade, with
locking lever.
■ Adjustable miter gauge.
■ Adjustable rip fence with scale indicator.
■ Riving knife and blade guard with anti-kickback pawls.
■ Front and rear guide rails with an easy to read scale on
front rail.
■ Blade height control handle to set depth of cut.
■ Rack and pinion bevel control.
■ Overload reset button.
■ On/off switch key.
WARNING:
Before attempting to use your new Ryobi table saw,
familiarize yourself with all the safety requirements listed
in this Operator's Manual and the operating features
shown in Figure 2.
Fig. 2
BLADE GUARD
MITER GAUGE
LOCK KNOB
MITER SCALE
BEVEL INDICATOR
BLADE CONTROL WHEEL
OVERLOAD RESET BUTTON
ON/OFF SWITCH WITH KEY
BLADE
CONTROL HANDLE
BEVEL
LOCK LEVER
BEVEL SCALE
RIP FENCE LOCK
DOWN HANDLE
RIP FENCE
SCALE
FRONT RAIL
ACCESSORY STORAGE
BRACKETS (NOT SHOWN)
RIP FENCE
MITER GAUGE
CHANNEL
THROAT PLATE
10" (254 mm) BLADE
RIVING KNIFE
ANTI-KICKBACK
PAWLS