Ryobi RE180PL1 Router User Manual


 
6
SPECIFICATIONS
UNPACKING
APPLICATIONS
Use your router only for the purposes listed below:
Routing grooves, shaping edges, freehand designs, etc. in wood.
Chamfering, rabbeting, dadoing, and dovetailing in wood.
Routing edges on laminates.
Plunge Depth 0 - 2 in. (0 - 5.08 cm)
Collet 1/2 in. (12.7 mm)
Adaptor 1/4 in. (6.35 mm)
Peak Horsepower 2
Input 120 Volts, 60 Hz, AC Only, 10.0 Amperes
No Load Speed 15,000 - 23,000 RPM
Power Cord 10 ft. (3 m)
Net Weight 8.5 lbs.
(3.86 kg.)
INSTRUCTIONS
Your router has been shipped completely assembled.
Carefully remove the tool and accessories from the
box. Make sure that all items listed in the packing
list are included.
Inspect the tool carefully to make sure no breakage
or damage occurred during shipping.
Do not discard the packing material until you have
carefully inspected and satisfactorily operated the
tool.
If any parts are damaged or missing, please call
1-800-525-2579 for assistance.
PACKING LIST
Plunge Router
Collet
Adaptor
15/16 in. (23.8 mm) Wrench
5/16-18 UNC-2A Flathead Screws (2)
Operator’s Manual
NOTE: The screws and the optional depth control knob
must be used when mounting your router to a router
table. They are the only screws that will secure your
router to a router table properly.
WARNING:
If any parts are missing do not operate your tool until
the missing parts are replaced. Failure to do so
could result in possible serious personal injury.