Filter
Top Products
Insert KEY into switch.
NOTE: Key is made of yellow piestico
1
To turn drill ON . . .
Insert finger under switch lever and pull.
To turn drill OFF.,. Push lever in.
In an emergency;.. , the drill bit BINDS... STALLS
•.. STOPS ., . or tends to tear the workpiece loose
•.. you can QUICKLY turn the drill OFF by hitting the
switch with the palm of your hand.
C
o
To lock switch in OFF position.., hoFd switch IN with
one hand.. , REMOVE key with other hand.
WARNING: FOR YOUR OWN SAFETY, ALWAYS
LOCK THE SWITCH "OFF" WHEN DRILL PRESS IS
NOT IN USE... REMOVE KEY AND KEEP IT IN A
SAFE PLACE... ALSO... IN THE EVENT OF A
POWER FAILURE (ALL OF YOUR LIGHTS GO OUT)
OR BLOWN FUSE OR TRIPPED CIRCUIT
BREAKER, TURN SWITCH OFF . • • LOCK IT AND
REMOVE THE KEY. THIS WILL PREVENT THE
DRILL PRESS FROM STARTING UP AGAIN WHEN
THE POWER COMES BACK ON.
17