Filter
Top Products
location and function of controls
1. BELT GUARD... Covers pulleys and belt during
operation of drill press,
2. BELT TENSION LOCK HANDLES... Tightening
handles locks motor bracket support to maintain
correct belt distance and tension.
3. HEAD LOCK SET SCREWS... Locks the head
to the column. ALWAYS have them locked in place
while operating the drill press,
4. TABLE SUPPORT,.. Rides on column to support
table.
5. COLUMN SUPPORT . . . Supports column and
provides mounting holes for column to base.
6. SUPPORT LOCK HANDLE... Tightening locks
table support to column, Always have it locked in
place while operating the Drill Press.
7. BASE... Supports Drill Press. For additional sta-
bility, holes are provided in base to bolt Drill Press
to bench. (See "Additional Safety Instructions for
Drill Presses").
8. SPRING CAP... Provides means to adjust quill
spring tension.
9. DEPTH POINTER... Indicates drilling depth and
is located between stop nuts.
10. DEPTH SCALE... Shows depth of hole bearing
drilled in inches and millimeters.
11.
12,
13.
14.
15.
16.
17.
18.
19.
COLUMN... Connects head, tab;le, and _............
a one-piece tube for easy alignmer_t ar_:_, mo,-_
ment. '-'
BEVEL SCALE... Shows degree table _s tied
for bevel operations. Scale is mounted on ta_:>e
support.
TABLE BEVEL LOCK... Locks the tabie ir-_a_,_,_
position from 0-45
TABLE ... Provides working surface to supp,::,;t
workpiece.
FEED HANDLE . .. For moving the chuck _;D o;
down. One or two of the handles may be ,_emove_,:
if necessary whenever the workpiece is of sucf_
unusual shape that it interferes with the handles
CHUCK.., Holds drill bit or other recommer_de(_;
accessory to perform desired operations
FEED STOP ROD.. , Holds stop nuts for dri!ti_lg
to specific depths,
STOP NUTS ... Limits the downward movemem
of the quill at any desired point within its travel
and prevents the pointer from moving upward
ON-OFF SWITCH . . . Has locking feature, this
feature is intended to prevent unauthorized an(_
possiable hazardous use by children and others.
1
BELT GUARD
8
SPRING CAP
9
DEPTH POINTER
FEED
SPRING
ADJUSTMENT
17
=EED STOP ROD
19
ON-OFF
10
DEPTH SCALE
18
STOP NUTS
12
BEVEL SCALE
13
TABLE BEVELLOCK
16
CHUCK
COLUMN
2
}ELT TENSION
LOCK
HANDLES
3
HEAD LOCK
SETSCREWS
4
/TABLE
SUPPORT
15
FEED HANDLE
14
TABLE
6
SUPPORTLOCK
HANDLE TABLE REMOVED
FOR CLARITY
9
5
COLUMN SUPPORT