Filter
Top Products
-10-
M1113 18" Wood/Metal Bandsaw
SETUP
Keep machine disconnected from
power until instructed otherwise.
SETUP
This machine has been carefully packaged for safe trans-
portation. If you notice the machine has been damaged
during shipping, please contact your authorized Shop Fox
dealer immediately. The following is a description of the
main components shipped with the Model
M1113.
Note:
If you can't find an item on this list, check the
mounting location on the machine or examine the pack
-
aging materials carefully
. Occasionally we pre-install cer-
tain components for safer shipping.
Main Components: (Figure
2) Qty
A. Table ........................................................1
B. Table Extension ............................................1
C. Table Insert ................................................1
D. Rear Rail ....................................................1
E. L-Brackets ..................................................2
F. Front Rail ...................................................1
G. Fence Assembly ............................................1
H. Miter Gauge Holder .......................................1
I. Miter Gauge ................................................1
Fasteners, Tools, & Miscellaneous: (Figure
3) Qty
• Hex Bolts
5
⁄16"-18 x 2" (Table Extension) ..............2
• Hex Nuts
5
⁄16"-18 (Table Extension) ....................2
• Flat Washers
5
⁄16" (Table Extension) ...................4
• Knobs
3
⁄8"-16 (Table Trunnion) ..........................2
• Cap Screws M6-1 x 16 (Rear Rail to Table) ...........
2
• Cap Screws M6-1 x 16 (L-Brackets to Table) ..........
2
• Knobs
5
⁄16"-18 x
5
⁄8" (L-Bracket to Front Rail) ........2
• T-Slot Nuts
5
⁄16" (L-Bracket to Front Rail) .............2
• Scale (Front Rail) ..........................................1
• Guide Blocks (Blade Guides) .............................
6
• Thumb Screws
1
⁄4"-20 x
1
⁄2" (Blade Guides) ...........6
• Hex Wrenches 3 and 5mm ........................ 1 each
• Flat Wrench 12/14mm ....................................
1
Inventory
Figure 2. Main component inventory.
Figure 3. Fasteners, tools, &
miscellaneous item inventory.