Filter
Top Products
ASSEMBLY
-9-
The following is a description of the
components shipped with the SHOP FOX
®
W1708 12" Disc Sander.
Should any parts be missing, examine the
packaging carefully to be sure parts are not
among the packing materials. If any parts are
missing, contact Woodstock International, Inc.
at 360-734-3482 or by e-mail at:
tech-support@shopfox.biz
.
1. Disc Sander
2. Miter Gauge
3. Sanding Disc
Figure 3. Disc sander components.
DO NOT connect the
machine to power at this
time. The machine must
remain unplugged
throughout the entire
assembly process. Failure
to do this may result in
serious personal injury.
!
2
3
1
• Workbench Load: Your disc sander has a
small weight load in a small footprint.
Most workbenches are suitable for the disc
sander. Reinforce the workbench if you
question its ability to support the disc
sander.
• Working Clearances: Consider existing and
anticipated needs, size of material to be
processed through each machine, and
space for auxiliary stands, work tables or
other machinery when establishing a
location for your disc sander.
• Lighting and Outlets: Lighting should be
bright enough to eliminate shadows and
prevent eye strain. Electrical circuits
should be dedicated or large enough to
handle amperage requirements. Outlets
should be located near each machine so
power or extension cords are clear of
high-traffic areas. Observe local electrical
codes for proper installation of new
lighting, outlets, or circuits.
ALWAYS make sure that all
entrances to your shop are
locked or that machines
are equipped with safety
lock-out devices to protect
curious children or visitors
from serious injury. Never
allow unsupervised people
in your shop who have not
been fully trained!
Shop Preparation
Box Contents
Overview
ASSEMBLY