Filter
Top Products
SAFETY
-7-
USE this and other machinery with caution
and respect. No list of safety guidelines can
be complete. Every shop environment is
different. Always consider safety first, as it
applies to your individual working
conditions. Failure to follow guidelines
could result in serious personal injury,
damage to equipment or poor work results.
1. Always disconnect the machine from the power source when moving or servicing the disc
sander!
2. All inspections, adjustments, and maintenance MUST be done with the power off and the
power cord unplugged. Wait for disc to come to a complete stop.
3. Always keep your fingers away from the moving disc. Serious personal injury could occur.
4. Never operate this disc sander if the disc is worn or damaged. Inspect disc before each use.
Worn discs stress the motor and can burn the workpiece.
5. Never use excessive force when sanding. This causes motor overload and increases the chance of
fingers slipping into the disc.
6. Always feed the material into the portion of the disc that is spinning down toward the table.
7. Always place material flat on the surface of the table before sanding.
8. If there is any doubt as to the stability of the material to be sanded, do not sand it.
9. If you ever experience difficulties performing the intended sanding operation, stop using the
disc sander! Then contact our service department or ask a qualified expert how the operation
should be performed.
10. Always wear a dust mask or respirator when sanding even if you have a reliable method of dust
collection.
11. Sanding dust from some woods may be toxic or cause an allergic reaction. Be sure to wear an
appropriate respirator when working around wood dust. Make sure there is adequate ventilation or
a constant source of fresh air. The dust from some species of wood can be toxic to some people.
Be sure to research the dangers of the specific species of wood you are working with.
READ and understand this
entire instruction manual
before performing any
operations with your
machine. Serious personal
injury may occur if safety and
operational information is not
understood and followed.
INSTRUCTION MANUAL
MODEL W1708
Disc Sander
Phone: 1-360-734-3482 • On-Line Technical Support: tech-support@woodstockint.com
COPYRIGHT © August, 2003 BY WOODSTOCK INTERNATIONAL, INC.
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT
THE WRITTEN APPROVAL OF WOODSTOCK INTERNATIONAL, INC.
Printed in China
Additional Safety Instructions for Disc Sanders