Filter
Top Products
ASSEMBLY
-10-
The unpainted parts of the Model W1708 are
coated with a waxy grease that protects them
from corrosion during shipment. For optimum
performance from your machine, make sure
you clean all moving parts or sliding contact
surfaces that are coated. Clean this grease off
with a solvent cleaner or citrus-based
degreaser. Do not use chlorine-based solvents—
if you happen to splash some onto a painted
surface, you will ruin the finish.
NEVER use flammables
such as gas or other
petroleum-based solvents
to clean your machine.
These products have low
flash points and present
the risk of explosion and
severe personal injury!
NEVER smoke while using
any cleaning solvents.
Smoking may cause
explosion or risk of fire
when exposed to these
products!
ALWAYS when using
solvents with fumes,
work in a well ventilated
area and keep away from
any potential ignition
sources (pilot lights). Most
solvents used to clean
machinery are toxic when
inhaled or ingested.
Always dispose of any
waste rags in a sealed
container to make sure
they do not cause fire or
environmental hazards.
Cleaning Machine