Filter
Top Products
-23-
N(.(,Fne\ijDXelXcD]^%J`eZ\)&'/
FG<I8K@FEJ
9cX[\>l`[\j
The blade guides should be as close to the workpiece as
possible. This will help ensure straight cuts by keeping the
blade from twisting and drifting off the cut line.
KfX[aljkk_\YcX[\^l`[\j#[fk_\j\jk\gj:
(% DISCONNECT BANDSAW FROM POWER!
)% Loosen the adjustment knob shown in =`^li\*) and
slide the blade guide as close to the workpiece as
possible, then re-tighten the knob.
=`^li\*)% Blade guide adjustment knob.
Blade Guides
Adjustment Knob
The feed rate is controlled by the spring and handle
shown in =`^li\**.
=fiJcfn\i=\\[IXk\1 Twist the handle clockwise to add
tension to the spring.
=fi=Xjk\i=\\[IXk\1 Twist the handle counterclockwise
to remove tension from the spring.
=\\[ IXk\
=`^li\**% Feed rate spring and handle.
Spring
Handle