Filter
Top Products
-27-
N(.(,Fne\ijDXelXcD]^%J`eZ\)&'/
FG<I8K@FEJ
D\kXc:_`g@ejg\Zk`fe:_Xik
The best method of evaluating the performance of your metal cutting operation is to inspect the chips
that are formed from cutting. Refer to the chart below for chip inspection guidelines.
:_`g
8gg\XiXeZ\
:_`g
;\jZi`gk`fe
:_`g
:fcfi
9cX[\
Jg\\[
=\\[
Gi\jjli\
8[[`k`feXc
8Zk`fej
Thin & Curled Silver
>ff[ >ff[
Hard, Thick &
Short
Brown or Blue Decrease Decrease
Lubricate with
a small amount
of oil
Hard, Strong &
Thick
Brown or Blue Decrease Decrease
Lubricate with
a small amount
of oil
Hard, Strong &
Thick
Silver or Light
Brown
>ff[
Decrease
Slightly
Check Blade
Pitch
Hard & Thin Silver Increase Decrease
Check Blade
Pitch
Straight & Thin Silver
>ff[
Increase
Powdery Silver Decrease Increase
Curled Tight &
Thin
Silver
>ff[
Decrease
Check Blade
Pitch
=`^li\+'. Metal chip inspection chart.