Filter
Top Products
Model W1783 (Mfg. Since 2/07)
-1-
and in working order.
Form habit of checking
to see that keys and adjusting
wrenches are removed from tool
before operation.
Cluttered
areas and benches invite accidents.
Do not use
pneumatic tools in damp or wet
locations, or where any flammable
or noxious fumes may exist. Keep
work area well lighted.
All children and visitors
should be kept at a safe distance
from work area.
by
locking your shop and shutting off
air valves.
It will do
the job better and safer at the rate
for which it was designed.
Do not
force tool or attachment to do a
job for which it was not designed.
The purpose of safety symbols is to attract your attention to possible hazardous
conditions. This manual uses a series of symbols and signal words which are intended
to convey the level of importance of the safety messages. The progression of
symbols is described below. Remember that safety messages by themselves do not
eliminate danger and are not a substitute for proper accident prevention measures.
NOTICE