Filter
Top Products
OTHER MACHINE USES
For setting grommets without the washers, or punching out holes, all the washers must be removed
from the hopper box and the guides, the grommet raceway must be moved back and the top and
bottom dies (parts nº 217, 218, 219 and 229) must be replaced by other parts specific to this task.
THIS MACHINE MUST NOT BE USED FOR ANY FUNCTION OTHER THAN THAT FOR
WHICH IT WAS ORIGINALLY DESIGNED AND WHICH IS SPECIFIED IN THIS
INSTRUCTION MANUAL: THE AUTOMATIC SETTING OF GROMMETS WITHOUT
WASHERS, GROMMETS ONLY, OR HOLE PUNCHING ONLY.