Filter
Top Products
4
5. When the battery capacity indicates full, unplug the power adapter and slide the voltage lock right to the
unlocked/off position (UNLOCK/OFF) to turn off the USB power when myPower ALL Plus is not in use.
NOTE: myPower ALL Plus will automatically shut down the power input when fully charged, so you can
charge it overnight.
Using myPower ALL Plus
myPower ALL Plus can be used to power and/or charge up to two portable devices simultaneously.
With devices that require higher voltage levels, like notebook computers and portable DVD players,
we recommend that you use myPower ALL Plus only to power the device. You will find that powering
without charging your higher voltage device will maximize the battery life of myPower ALL Plus, thus
letting you use your portable device even longer.
To use myPower ALL Plus to power and/or charge your device, take these steps which are described in
detail in the following sections.
• Select an adapter plug for your main device and connect the plug to the output cord.
• Connect the power output cord to myPower ALL Plus.
• Adjust the voltage level to match that of your main device and lock the voltage setting.
• Connect the adapter plug/output cord to your main device.
• Connect a second 5V device.
MP3450_ug_0507_rev3_r1 6/6/07 10:08 AM Page 4