Filter
Top Products
Operator Information
THS710A, THS720A, THS730A & THS720P Service Manual
2–3
CAUTION. To avoid overheating, do not connect external power while the
instrument is in a confined space, such as in the soft case.
Understanding the Front Panel
The SCOPE and METER buttons select the operating mode. The front panel has
additional buttons for the functions you use most often and menus to access the
more specialized functions.
Press the front-panel SCOPE button to enter scope mode. Then, press AUTO-
RANGE to set the vertical, horizontal, and trigger automatically for a usable
display. A typical scope-mode display is shown in Figure 2–3.
Status line
Waveform readout lines
Measurement
readout area
Graticule
area
Figure 2–3: Typical scope-mode display
Using Scope Mode