Filter
Top Products
Operator Information
2–8
THS710A, THS720A, THS730A & THS720P Service Manual
14. CH 1, CH 2, MATH, REF A, REF B. Displays waveform and chooses
selected waveform. In harmonics mode (THS720P), CH 1 and CH 2 also
display harmonics of voltage and current waveforms; MATH displays power
measurements.
15. SCOPE. Selects scope mode.
16. METER. Selects meter mode.
Connecting and Using the Probes
The oscillscope probes and meter leads attach to the connectors located on the
top and side panels of the TekScope instrument as shown in Figure 2–5.
Top panel
Side panel
Figure 2–5: Connector locations