Filter
Top Products
Maintenance
6–14
THS710A, THS720A, THS730A & THS720P Service Manual
Front cover
Gasket material
Trim tails to
1
@
8
inch
Overlap gasket material
Figure 6–6: Installing the gasket
5. Slip the handle into the guides of the back cover as shown in Figure 6–7.
6. Place the front cover assembly onto the instrument. Taking care not to pinch
the handle, align it into the guides in the front cover. Align the buttons so
they all protrude through the holes in the front cover.
7. Holding the case together, pick it up and place it front side down on a soft
surface.