Tripp Lite 3-Phase 20kVA Welding System User Manual


 
18
Specifications
(continued)
+ Backup times are expandable with additional Battery Packs, sold separately.The policy of Tripp Lite is one of continuous improvement.Specifications are subject to change without notice.
Regulatory Compliance Identification Numbers
For the purpose of regulatory compliance certifications and identification, your Tripp Lite product has been assigned a unique series number.The series number can be found on the product nameplate label, along with all required
approval markings and information.When requesting compliance information for this product, always refer to the series number.The series number should not be confused with the marking name or model number of the product.
FCC Specifications for Models with FCC Approval:
This device complies with part 15 of the FCC Rules.Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules.These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a commercial environment.This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications.Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to
correct the interference at his own expense.The user must use shielded cables and connectors with this product.Any changes or modifications to this product not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.
Model: SU30K3/3XR5
Input
Input Voltage 120/208V AC, 3ø, 4 Wire (plus ground), wye
Input Frequency 60 Hz ± 3 Hz
Voltage Correction Range 88-144/166-250V AC
Input Current (Per Phase, On-Line) 90A
Inrush Current <300A
Power Factor (Full Load) >0.95
Efficiency (Full Load/On-Line) >89%
Circuit Breaker 200A (3p)
Input Bypass Circuit Breaker 200A (3p)
Output
VA 30000
Watts (Power Factor: 0.8) 24000
Waveform (On-Line) Sinewave
Waveform (On-Battery) Sinewave
Output Voltage (RMS) 120/208V AC, 3ø, 4 Wire (plus ground), wye
Output Frequency 60 Hz (± 0.1 Hz on battery)
Voltage Regulation ±2%
Max. Harmonic Distortion
(Non-Linear Full Load) <5%
Overload Capabilities
<
102% (continuous), 102%~125% (1 min.),
125%~150% (30 sec.),
>
150% (2 sec.)
Short Circuit Capability
>
250A
Crest Factor 3:1
Battery
Battery Type Sealed, Lead Acid, 240V DC, 9AH
Battery Pack Quantity Five Packs (20 12V DC Batteries per pack)
Protection Ten UL-recognized 30A 600VDC rated
cartridge fuses (two per battery pack) and
fuse block (1 per battery pack)
Typical Backup Time (Half Load)25 min. +
Typical Backup Time (Full Load) 11 min. +
Operation
On-Line Transfer Time
(Line to Battery, Battery to Line) 0 ms
Audible Noise (Full Load @ 1 meter) <65 dBA
Indicators
Includes an LCD Display and LEDs (AC Line In, Bypass Line In, AC to DC,
DC to AC, AC Output, Battery Back-Up, Bypass).
Communications
Includes an RS-232 DB9 female connector, an AS-400 DB9 female
connector, a dry contact DB9 female connector and an accessory slot.
Connections
Input Terminal Block 100A
Output Terminal Block 100A
Physical Specifications
Unit Dimensions (H x W x D) 48.5 x 19.3 x 36 in.
Unit Weight 935 lb.
Shipping Dimensions (H x W x D) 61.5 x 31 x 44.5 in.
Shipping Weight 1152 lb.
Model: SU30K3/3
Input
Input Voltage 120/208V AC, 3ø, 4 Wire (plus ground), wye
Input Frequency 60 Hz ± 3 Hz
Voltage Correction Range 88-144/166-250V AC
Input Current (Per Phase, On-Line) 90A
Inrush Current <300A
Power Factor (Full Load) >0.95
Efficiency (Full Load/On-Line) >89%
Circuit Breaker 200A (3p)
Input Bypass Circuit Breaker 200A (3p)
Output
VA 30000
Watts (Power Factor: 0.8) 24000
Waveform (On-Line) Sinewave
Waveform (On-Battery) Sinewave
Output Voltage (RMS) 120/208V AC, 3ø, 4 Wire (plus ground), wye
Output Frequency 60 Hz (± 0.1 Hz on battery)
Voltage Regulation ±2%
Max. Harmonic Distortion
(Non-Linear Full Load) <5%
Overload Capabilities
<
102% (continuous), 102%~125% (1 min.),
125%~150% (30 sec.),
>
150% (2 sec.)
Short Circuit Capability
>
250A
Crest Factor 3:1
Battery
Battery Type Sealed, Lead Acid, 240V DC, 9AH
Battery Pack Quantity Three Packs (20 12V DC Batteries per pack)
Protection Six UL-recognized 30A 600VDC rated
cartridge fuses (two per battery pack) and
fuse block (1 per battery pack)
Typical Backup Time (Half Load)13 min. +
Typical Backup Time (Full Load) 5 min. +
Operation
On-Line Transfer Time
(Line to Battery, Battery to Line) 0 ms
Audible Noise (Full Load @ 1 meter) <65 dBA
Indicators
Includes an LCD Display and LEDs (AC Line In, Bypass Line In, AC to DC,
DC to AC, AC Output, Battery Back-Up, Bypass).
Communications
Includes an RS-232 DB9 female connector, an AS-400 DB9 female
connector, a dry contact DB9 female connector and an accessory slot.
Connections
Input Terminal Block 100A
Output Terminal Block 100A
Physical Specifications
Unit Dimensions (H x W x D) 35.3 x 19.3 x 36 in.
Unit Weight 662 lb.
Shipping Dimensions (H x W x D) 43 x 28 x 44.5 in.
Shipping Weight 750 lb.