Filter
Top Products
STORING A PHONE NUMBER IN MEMORY
With VoiceDial, programming is easy. Just follow the
preprogrammed voice prompts.
1) Remove the handset from the base.
2) Press
store
.
The
talk
LED blinks and the
monitor LED lights.
You will hear:
For example: Press 0, then 1.
3) You will hear:
Example: say “John Smith.”
Then, 2 times, you will hear:
To confirm, repeat the name, “John Smith.”
If you don’t respond within 6 seconds, you will hear
“louder please.” If you still don’t respond, the handset
beeps and the programming procedure cancels.
4) You will hear:“On the keypad, enter the phone number
then press
store
.”
Use the keypad to enter the number
you want to store (up to 16 digits).
For example: enter 555-5555;
then press
store
.
5) You will hear:
Then, you will hear a confirmation beep.
14
"Say the name you want to store."
"Please repeat."
"On the keypad, enter the
phone number then press ."
"Store mode. Enter the
2-digit memory location."
TIP
When the voice prompt says
“Say yes or no,” if you don’t
say anything within 6
seconds, you will hear
“louder please.” If you still
don’t respond, the handset
beeps and the programming
procedure cancels.
TIP
When the voice prompt says
“Enter the phone number
you want to store,” if you do
not make an entry within 10
seconds, the handset beeps
and the programming
procedure cancels.
TIP
If you need a pause to
separate groups of numbers
during dialing, press
pause
.
This 4 second
pause
counts
as one digit. Pressing
pause
more than once increases
the length of the pause
between numbers.
NOTE: To automatically select the first available (empty)
memory location, press 0, then 0.
NOTE: You can skip the VoiceDial and enter a phone
number in memory without a name. Enter the number on
the keypad, then press
store
(go to step 5).
"555 5555 stored memory 01."
I:...exv958final.vp
Fri Jun 19 20:20:17 1998
Color profile: Disabled
Composite Default screen