Filter
Top Products
SETTING THE TOLL SAVER SWITCH
The ringtime/toll saver switch
allows you to set the number
of rings the caller hears before
your answering system plays
your outgoing message. You
can set the switch to answer
after two rings or after four rings.
In the
TS
(Toll Saver) position, the
answering system picks up after two rings
if you have new messages, and after four rings
if there are none. This way, if you call long distance to
check your messages, you can hang up after the second
ring to avoid being billed.
USING THE RESET BUTTON
The
RESET
button on the bottom of the base is used to
initialize the base computer.
The reset button can be used if an AC power line
disturbance causes the answering system to malfunction
and become inoperative. Pressing
RESET
does NOT erase
any data stored in your system memory.
25
THE INTEGRATED ANSWERING DEVICE
USING
USING ANSWER
I:...exv958final.vp
Fri Jun 19 20:25:56 1998
Color profile: Disabled
Composite Default screen