Filter
Top Products
INSTALLING THE HANDSET BATTERY PACK
1) Press in on the battery cover release
and slide the battery compartment
cover down.
2) Put in the rechargeable
Nickel-Cadmium battery pack. The
battery pack fits with the electrical
contacts touching. The label side on
the battery pack should be facing up.
3) Slide on the battery cover and snap
it into place.
CHARGING THE BATTERY PACK
▼
Initial battery charging
Before using your phone for the first time, fully charge the
rechargeable Nickel-Cadmium battery pack. We recommend
that the battery pack charge for approximately 15-20 hours,
without interruption, before plugging the phone line into
your new phone.
1) Place the handset on the base.
2) Make sure the
status
LED lights. If the LED doesn’t light,
check to see that the AC adapter is plugged in and that the
handset makes good contact with the base charging contacts.
Continued
6
HINT
Before using your phone,
fully charge the
rechargeable Nickel-
Cadmium battery pack.
We recommend that the
battery pack charge for
15-20 hours without
interruption before
plugging the phone line
into your new phone.
!
In desk/tabletop use, the
battery charges only in the
vertical position. When
wall mounted, hang the
handset on the cradle.
Use only the Uniden
battery (BT-098) supplied
with your phone.
I:...exv958final.vp
Fri Jun 19 20:15:01 1998
Color profile: Disabled
Composite Default screen