Filter
Top Products
REMOTE ACCESS AWAY FROM HOME
You can operate your answering system from a remote
location using any touch-tone telephone. Use this function to
check for recorded messages, to play or delete messages, or
even to record a new outgoing message.
1) Call your telephone number.
2) During the outgoing message playback, press
#
followed by
your PIN number. Refer to page 24 for instructions on how
to select a PIN code.
3) The answering system announces the time and day stamp
followed by the number of messages stored in memory.
Message playback automatically begins.
4) You may continue to listen to your messages, or you may
select a command from the following chart:
FUNCTION PRESS
Repeat #, 1
Play #, 2
Skip #, 3
Delete #, 4
Stop #, 5
Answer On #, 6
Memo Record/Stop #, 7
OGM Record/Stop #, 8
Answer Off #, 9
Room Monitor
#,
*
5) After all of your messages have played, you will hear
intermittent beeps indicating that the system is in the
command waiting mode. You may enter another command
at this time from the chart above.
6) When you are finished, hang up to exit the system. The
answering system automatically returns to standby.
30
NOTE
You must enter a
command within 15
seconds of entering
command waiting mode
or the answering system
automatically hangs up
and returns to standby.
I:...exv958final.vp
Fri Jun 19 21:18:37 1998
Color profile: Disabled
Composite Default screen