Wachsmuth & Krogmann ZJ4116QA Drill User Manual


 
7
NOTE: Make sure the proper extension cord is used and is in good condition. The use of
any extension cord will cause some loss of power. To keep this to a minimum and to
prevent overheating and motor burnout, use the table as below to determine the
minimum wire size (A.W.G.) extension cord.
Use only 3-wire extension cords which have 3-prong grounding type plugs and 3-pole
receptacles which accept the tools plug.
Extension Cord Length Gauge (A.W.G.)
0-25 12
25-50 10
SAVE THESE INSTRUCTIONS!