Filter
Top Products
1
HAZARD
WARNING
• Follow the requirements of the Material Safety Data
Sheet supplied by the coatings manufacturer.
• Exhaust and fresh air introduction must be provided
within the spray area to keep the air free of accumula-
tions of toxic materials.
• Wear a mask or respirator. Read all instructions for the
mask to insure that it will provide the necessary protec-
tion against the inhalation of harmful vapors.
PREVENTION
• Maximum operating range of the gun - 3625 PSI fluid
pressure.
• NEVER aim the gun at any part of the body under any
circumstances.
• NEVER let any part of the body come in contact with the
fluid stream. DO NOT come in contact with a fluid stream
created by a leak in the fluid hose.
• Paint hose can develop leaks from wear, kinking, abuse
etc. A leak is capable of injecting material into the skin.
Paint hose should be inspected before each use. Re-
place a damaged hose.
• NEVER put hand in front of the gun. Gloves will not
provide protection against an injection injury.
• ALWAYS lock the gun trigger when cleaning, changing
tips or leaving unattended.
• Some spray pumps prohibit the use of halogenated
hydrocarbon solvents.
• Halogenated hydrocarbon solvents such as methylene
chloride and 1,1,1 - Trichlorethane are not compatible
with aluminum and may cause an explosion. If you are
not sure of a material’s compatibility with aluminum,
contact your coatings supplier. Halogenated hydrocar-
bon solvents are compatible with the GM2000 spray gun
and may be used if the solvents are compatible with the
pump and other accessories.
• ALWAYS shut fluid pump off and release all pressure
before servicing, cleaning, or changing tips.
Toxic Substances: Some materials may be harm-
ful if inhaled or come in contact with the skin.
Explosion hazard incompatible materials. May cause
property damage or severe injury.
Injection. A high pressure stream of paint can pierce the
skin and underling tissues, leading to serious injury and
possible amputation.
5