Wagner SprayTech 3.31 Paint Sprayer User Manual


  Open as PDF
of 36
 
6 ProSpray3.29•3.31
GB
General view of application Description of unit
 
 
2.2 Coating materials

i


Dilutable lacquers and paints or those containing solvents, two-
component coating materials, dispersions, latex paints.
Noothermaterialsshouldbeusedforsprayingwithout
WAGNER’sapproval.

Despitesuctionlterandinsertionlterinthespraygun,ltering
of the coating material is generally advisable.
Stir coating material before commencement of work.
i





With this unit it is possible to process highly viscous coating
materials of up to around 25.000 MPa·s.
If highly viscous coating materials cannot be taken in by suction,
theymustbedilutedinaccordancewiththemanufacturer’s
instructions.

The appropriate processing time must be adhered to exactly.
Within this time rinse through and clean the unit meticulously with
the appropriate cleaning materials.
Coating materials with sharp-edged additional materials
These have a strong wear and tear effect on valves, high-
pressure hose, spray gun and tip. The durability of these parts
cane be reduced appreciably through this.
 
 
The main areas of application are thick layers of highly viscous
coating material for large areas and a high consumption of
material.
A piston pump takes in the coating material by suction and
conveys it to the tip. Pressed through the tip at a pressure of
up to a maximum of 221 bar (22,1 MPa), the coating material
isatomised.Thishighpressurehastheeffectofmicrone
atomisation of the coating material.
As no air is used in this process, it is described as an AIRLESS
process.
Thismethodofsprayinghastheadvantagesofnest
atomisation, cloudless operation and a smooth, bubble-free
surface. As well as these, the advantages of the speed of work
and convenience must be mentioned.
 
In the following there is a short description of the technical
construction for better understanding of the function.
WAGNERProSprayunitsareelectricallydrivenhigh-pressure
spraying units.
A gear unit transfers the driving force to a crankshaft. The
crankshaft moves the pistons of the material feed pump up and
down.
The inlet valve is opened automatically by the upwards
movement of the piston. The outlet valve is opened when the
piston moves downward.
Thecoatingmaterialowsunderhighpressurethroughthehigh-
pressure hose to the spray gun. When the coating material exits
fromthetipitatomizes.
The pressure regulator controls the volume and the operating
pressure of the coating material.
Materials 
Model
PS 3.21
PS 3.23
PS 3.25
PS 3.29
PS 3.31
PS 3.34
PS 3.39
Releaseagents,oils,undercoats,primers,llers,
synthetic resin-based paints, acrylic paints
recommendednozzlesize:FineFinish0.008“-0.014“
up to 200 m
2
200 m
2
- 800 m
2
more than 800 m
2
Emulsion paints, latex paints
recommendednozzlesize:0.017“-0.027“
up to 200 m
2
200 m
2
- 800 m
2
more than 800 m
2
Anti-corrosiveagents,ameretardants,fabric
adhesive
recommendednozzlesize:0.021“-0.031“
up to 200 m
2
200 m
2
- 800 m
2
more than 800 m
2
Airless-scrapers
recommendednozzlesize:0.027“-0.039“
up to 200 m
2
200 m
2
- 800 m
2
more than 800 m
2
= Recommended =Not-recommended
 previous next