Wagner SprayTech 3.31 Paint Sprayer User Manual


  Open as PDF
of 36
 
8 ProSpray3.29•3.31
GB
Description of unit Starting operation
 
ProSpray 3.29 
Voltage: 220~240Volt,50/60Hz
 7.5 A 8 A
 3 x 1.5 mm
2
– 6 m
 1725 Watt 1840 Watt
 221 bar (22.1 MPa)

 3,0 l/min 3,8 l/min
 0.029 inch – 0.032 inch –
0.73 mm 0.81 mm

 43°C
 25.000 mPa·s
Weight: 43.5 kg
 DN6mm,15m,connection
thread M 16 x 1.5
 590 x 529 x 726 mm
 80 dB (A) *
* Place of measuring: 1 m in distance from the unit and 1.6
mabovetheoor,12MPa(120bar)operatingpressure,
reverberantoor.
 
Pushing or pulling the unit
Pull out the handle (Fig. 2, Item 1) until it will come no further.
Insert the handle – push the buttons (2) on the spars, and then
push in the handle.
2
1
2
 
Secure the unit with a suitable fastening.
 
 
separating oil
1. Screw the high-pressure hose (2) to the coating material
outlet (Fig. 3, Item 1).
2. Screw the spray gun (3) with the selected tip onto the
high-pressure hose.
3. Tightentheunionnutsatthehigh-pressurehosesrmly
so that coating material does not leak.
3
2
1
4. Remove the oil cup cap with a straight-slot screwdriver.
5. Fill the oil cup with EasyGlide (Fig. 4) until the oil gauge
(4) is showing that it is full.
Attention


6. Replace oil cup cap.
7. Press oil button 2-5 times to prime the oiler. Press once
foreveryeighthoursofusagetolubricatetheuidsection.
 previous next