Filter
Top Products
Introduction
1–14 975-0401-01-01
Remote Panel (Sold Separately)
This section describes the parts of the optional remote panel
(Part number: 808-8040-00) of the Truecharge™ 2 Battery
Charger. The remote panel can be mounted using a
communications cable up to 15 m (50 ft) from the
Truecharge™ 2 Battery Charger connected via the
communication port for convenience.
The Remote Panel can be used to:
• Program the charger for battery type and temperature
• Set the charger mode (two or three-stage charging)
• Activate and terminate equalization (not allowed for
GEL and AGM)
• Limit the maximum charger output current (20, 40, 60,
80, and 100% of charger rating) to lower the current
drawn from the generator or AC source
• Set the charger to
ON or STANDBY
• Set or cancel an equalization cycle
• Display faults and warnings
• Display basic battery level and settings
Figure 1-6
Truecharge™ 2 Battery Charger Remote Panel (optional)
1
2a
5
8
4
6
3
7
2
6a