Filter
Top Products
975-0251-01-01 v
Important Safety Instructions
1. Before installing and using the Freedom 10 Inverter/Charger, read all
instructions and cautionary markings on the Freedom 10 Inverter/Charger, the
batteries, and all appropriate sections of this guide.
2. For continued protection against the possibility of fire, replace the fuse only
with a fuse of the specified voltage, current, and type ratings.
3. To avoid damage, operate the equipment only within the specified AC (mains)
and DC (battery) voltages.
4. Do not expose the Freedom 10 Inverter/Charger to rain, snow, spray, or bilge
water. To reduce risk of fire hazard, do not cover or obstruct the ventilation
openings. Do not install the Freedom 10 Inverter/Charger in a zero-clearance
compartment. Overheating may result.
5. Use only attachments recommended or sold by the manufacturer. Doing
otherwise may result in a risk of fire, electric shock, or injury to persons.
6. To avoid a risk of fire and electric shock, make sure that existing wiring is in
good condition and that wire is not undersized. Do not operate the Freedom
10 Inverter/Charger with damaged or substandard wiring.
7. Do not operate the Freedom 10 Inverter/Charger if it has received a sharp
blow, been dropped, or otherwise damaged in any way. If the Freedom 10
Inverter/Charger is damaged, see the Warranty section.
8. Do not disassemble the Freedom 10 Inverter/Charger. It contains no user-
serviceable parts. See Warranty for instructions on obtaining service.
Attempting to service the Freedom 10 Inverter/Charger yourself may result in
a risk of electrical shock or fire. Internal capacitors remain charged after all
power is disconnected.
9. To reduce the risk of electrical shock, disconnect both AC and DC power
from the Freedom 10 Inverter/Charger before attempting any maintenance or
cleaning or working on any circuits connected to the Freedom 10 Inverter/
Charger. Turning off controls will not reduce this risk.
10. The Freedom 10 Inverter/Charger must be provided with an equipment-
grounding conductor connected to the AC input ground.
WARNING
This chapter contains important safety and operating instructions. Read and keep this
Owner’s Manual for future reference.
Important:
General safety information for installation and operation is contained
throughout this manual where they apply and are not included In this summary.