Filter
Top Products
– 17 –
AE00839
Connection
Alternating Current (AC)
Be sure any electric devices are turned off before
plugging them in.
9 Be sure all electric devices including the lines
and plug connections are in good condition
before connection to the generator.
9 Be sure the total load is within generator rated
output.
9 Be sure the receptacle load current is within
receptacle rated current.
TIP
Make sure to ground (Earth) the generator.
When the electric device is earthed, always the gener-
ator must be earthed.
1. Start the engine.
2. Plug in to AC receptacle.
NOTICE
WARNING
7DK-043
1
7DK-049
1
7DK-048
3. Make sure the AC pilot light 1 is on.
1 AC pilot light
4. Turn the economy control switch to “ON” 1.
1 I “ON”
5. Turn on any electric devises.
TIP
The economy control switch must be turned to “OFF” to
increase engine speed to rated rpm.
7DK-9-10 09.1.27 1:46 PM Page 17