Filter
Top Products
– 28 –
2
1
7DK-065a
7DK-068
6. Install the muffler screen and the muffler cap.
7. Install the cover and tighten the screws.
3. Remove the carbon deposits on the muffler screen
and spark arrester using a wire brush.
When cleaning, use the wire brush lightly to avoid
damaging or scratching of the muffler screen and
spark arrester.
4. Check the muffler screen and spark arrester.
Replace them if damaged.
5. Install the spark arrester.
TIP
Align the spark arrester projection 1 with the hole 2 in
the muffler pipe.
NOTICE
711-075
7DK-9-10 09.1.27 1:46 PM Page 28