– 23 –
4. Check for discoloration and remove the carbon.
The porcelain insulator around the center elec-
trode of spark plug should be a medium-to-light tan
color.
5. Check the spark plug type and gap a.
TIP
The spark plug gap should be measured with a wire
thickness gauge and, if necessary, adjusted to specifi-
cation.
2. Remove the spark plug cap 3 and cap 4, and
insert the tool 5 through the hole from the outside
of the cover.
5
6
7DK-054
Spark plug inspection
The spark plug is important engine components, which
should be checked periodically.
1. Remove the screws 1, and then remove the cover
2.
Standard Spark Plug:
BPR6HS (NGK)
Spark Plug Gap a:
0.6–0.7 mm (0.024–0.028 in)
3. Insert the handlebar 6 into the tool 5 and turn it
counterclockwise to remove the spark plug.
7DK-9-10 09.1.27 1:46 PM Page 23
