9
To change the size of the text
On the Trip Info Page, you can change the size of the
text that displays, which also changes the number of info
elds. When the device is set to the small text option, it
displays eight info elds (2 wide, 6 narrow)—when it is set
to the large text option, it displays three wide info elds.
Press MENU. The available text size option is preceded
by "Switch to" —highlight the option and press ENTER.
To change info elds
On the Map Page, Compass Page, and Trip Info Page,
you can customize which info elds display for normal use
and when navigating. To change info elds for navigating,
make the changes while the device is navigating a route.
1. From the page, go to MENU > Info Fields > Change
Info Fields.
2. Select the info eld you want to change and press
ENTER. A list of available info elds opens.
3. Select the new info eld and press ENTER.
4. When you nish changing info elds, press QUIT.
To restore info elds
On the Map, Compass, and Trip Info Pages, you can
restore the information elds to their default settings.
This restores which elds show and their arrangement.
From the page, go to MENU > Info Fields >
Restore Default Info Fields.
Units
You can select the units for different types of
measurements that are used on the PN-Series GPS.
To change the units, from any page go to MENU >
Device Setup > Units.
For more information, see Units on page 9.
Navigating or Tracking
Tracking is the normal state of the device when it has a
GPS x. You can turn off track recording, but the device
is still in tracking mode. When you follow a route on the
device, you are navigating.
Visit the DeLorme Wiki at wiki.delorme.com for more
information. The latest version of the User Manual is
always available for download.
General Information
