52
The Tracks Page
Record points by–The method for logging points;
select Time or Distance from the drop-down list.
A short time interval gives you the most detailed
results but quickly adds many points; logging by
distance gives you longer recording time.
Recording interval–The amount of time or distance
between each point recording. To edit the number,
highlight it and press ENTER. Use the left/right arrows
on the arrow keypad to select a number and use the
up/down arrows to change it.
When track is full–Determines what the device
does when the maximum number of points (10,000
per track) is reached.
» Overwrite Points–The oldest points on the track
are replaced with new points.
» Stop Recording–The device stops recording.
» Start Recording a New Track–The device saves
the track and starts recording a new track.
Prompt to Reset Trip Info–When this check box
is selected, the Reset Trip Info page appears when
you manually save or clear an active track. This
synchronizes the track with the Trip Info.
To restore the default settings for all options, select
Restore Defaults.
Managing Active Tracks
To record the active track
To turn track recording on, select On. To turn it off again,
select Off. The selected button looks indented and the
text is white (the text on the selected button is black
when using the Midnight display option).
To clear the active track
To clear the active track and start recording a new track,
select Clear. If the Prompt to Reset Trip Info check box is
selected in the track settings, edit the check boxes and
select Reset Now, or press QUIT to exit the page. If track
recording is turned on, a new track will start recording.
To follow the active track
To follow the active track back to your starting point,
select Follow. The device creates a route and the Map
