A SERVICE OF

logo

Chapter 4 Parameters|
4-56 Revision July 2008, EG03, SW V1.06
Settings 00 No fault occurred
01 Over-current (oc)
02 Over-voltage (ov)
03 Overheat (oH)
04 Overload (oL)
05 Overload1 (oL1)
06 External fault (EF)
07 IGBT protection (occ)
08 CPU failure (CF3)
09 Hardware protection failure (HPF)
10 Over-current during acceleration (OcA)
11 Current exceeds 2 times rated current during decel. (ocd)
12 Current exceeds 2 times rated current during steady state
operation (ocn)
13 Ground fault (GFF)
14 Low voltage (Lv)
15 CPU READ failure (CF1)
16 CPU WRITE failure (CF2)
17 Base Block (bb)
18 Motor over load (oL2)
19 Reserved
20 Software/password protection (codE)
21 Emergency stop (EF1)
22 Phase-Loss (PHL)
23 Low-current (Lc)
24 Feedback Loss (FbL)
25 Reserved
26 Fan Power Fault (FANP)
27 Fan 1 Fault (FF1)
28 Fan 2 Fault (FF2)
29 Fan 3 Fault (FF3)
30 Fan 1, 2, 3 Fault (FF123)
31 Fan 1, 2 Fault (FF12)
32 Fan 1, 3 Fault (FF13)
33 Fan 2, 3 Fault (FF23)
34 Gate Drive Low Voltage Protect (Fv)
35~40 Reserved
41 GFF hardware error (HPF1)