Chapter 4 Parameters|
4-26 Revision July 2008, EG03, SW V1.06
00 - 10 Feedback Signal Actual Value
Factory setting: Read Only
This parameter displays feedback signal value.
00 - 11 Feedback Signal (%)
Factory setting: Read Only
This parameter displays feedback signal value(%).
00 - 12 User Target Value (Low bit) uL 0-99.99
Factory setting: Read Only
00 - 13 User Target Value (High bit) uH 0-9999
Factory setting: Read Only
User Target Value = Actual output frequency (0-04) × User Defined Multiplier (02-10).
Maximum summed display of both parameters is 999999.99.
When User Target Value <=99.99, 00-12=0.
00 - 14 PLC Time
Factory setting: Read Only
This parameter displays remaining time of PLC each step.
00 - 15 Output Reactive Power (KVAR)
Factory setting: Read Only
This parameter displays reactive power of AC drives.
