Issue Cause Solution
The printer Ready indicator light
is not
lit.
Press PAUSE/RESUME to return
the pr
inter to the Ready state.
The top cover is not closed
properly.
Close the top cover firmly.
The Data indicator light is
flashing.
The printer is probably still
receiving data. Wait for the Data
indica
tor to stop flashing.
REPLAC
E<COLOR>
CARTRIDGE appears on
the printer display.
Replace the print cartridge
specified on the printer display.
A printer message other than
Ready appears on the printer
control panel.
See Control panel
messages.
The parallel port may have a
DOS timeout error.
Add a MODE command to
the AUTOEXEC.BAT file. See
the DOS ma
nual for additional
information.
The P S (PostScript Emulation)
personality is not selected.
Select PS or AUTO for
the printer language. See
Changing pr
inter control
panel configuration settin g s.
The correct driver is not selected
in the software application or
printer driver.
Select the driver for PostScript
Emulation for this printer in the
software application or printer
driver.
The printer is not properly
configured.
See Changing printer con trol
panel configuration settin g s.
The computer port is not
configured or is not working
properly.
Run another peripheral
connected to this port to
verify that the port is w orking
properly.
Printer is on, but nothing prints
The printer has not been
correctly named for the network
or for a Macintosh.
Use the appropriate utility to
name the printer on the network.
For Macintosh, name the printer
from within the Chooser menu.
EN_WW Printer response problems 167
